A good choice for a sidewalk or walkway around your house, the asphalt paving project in Kansas City, Missouri has a number of advantages. It is durable, easy to install and it can be left up year round, unlike other concrete-based materials that have to be replaced every two years or so. Asphalt paving Kansas City will also keep your driveway or patio looking its best, which is especially important for those with sensitive pets or children who may accidentally step on something they shouldn’t.
Asphalt is relatively easy to cut to shape and the masonry cutting process will give you the results you desire. The only material you will need to purchase for this type of paving project is a concrete sealant. It should come in either an adhesive or water-based version. The sealant is the core material that holds everything together, including the aggregate and grout. It is important to use a water-based sealant, as any solvent will cause the sealant to dry up, which will weaken the pavement and reduce its durability.
Once the asphalt is laid down, it is important to remove any existing aggregate and grout before doing the next step. This is a bit more involved than you might expect, but it can be done in a few hours, depending on how much extra preparation you need to do. Since the new asphalt is laid on top of the old one, it is not necessary to replace the entire surface of the older concrete. In fact, it is very easy to simply mix the new mixture, pour it on the old surface and simply repeat the mixing and pouring process over again. It will be much harder to get the new mix to adhere to the existing grout, and the entire job will take a lot longer. You will need to mix the new mixture and apply it to the existing concrete surface before grout begins to form. If grout is already in place, you should add more concrete sealant to the mix to help it adhere properly.
Once the concrete sealant has been applied, the area around the new asphalt should be sanded down and prepped with primer to make it easier for grout to adhere. The new pavement will need to be prepared with another layer of grout, if the existing concrete has grout. To prepare the new pavement, you will need to cut the old grout away from the concrete, using a hand saw or power sander.
Once the old grout has been removed from the concrete, you can then attach it with sealant in layers, starting at the edges and working your way toward the middle. It is always a good idea to have two coats of the sealant applied to make sure you don’t do damage to the grout while you are doing the new installation. Even though the grout is now attached, you may have to reapply more sealant to ensure it sticks well. to the new surface.
Asphalt paving can look beautiful, even when the weather is bad or you just want to do a quick repair. The added flexibility of the concrete sealant makes the job a breeze, and it is very durable, which means the job won’t need to be done as often as other types of concrete-based pavements.